Top triple-clamps on the cheap?
leanintree at gmail.com
Thu Sep 27 15:37:24 PDT 2007
Been dinking with my steering head bearings (likely soon to replace again
since I think I may have fouled up the last install, D'oh!). Going through
my routine monthly tightening jag. Here's the problem...
The pinch bolts that hold the top of the fork tubes are in fine shape. The
aluminum triple clamps that they thread in... meh... not so much. See
attached pic. For some time, the left was rather stripped (legacy of the
previous owner), but with enough threads to bite ok. Now the right has done
the same, probably by me. Steel bolt has chewed off the aluminum threads
inside the clamp itself, so I'm thinking that unless I just want to hog it
out and put a seperate bolt and nut on it, there's really no fixing it.
Don't get me wrong, they're both tight, but I feel it's only a matter of
time until they won't be. I'm afeared each time I loosen them to adjust the
steering head, and I know one of these days I'll pull them apart, tighten,
and they won't pinch again.
Looked up the price on Ron Ayers.. Dayumm!! $269??!! they're aluminum, not
So... anyone have a basket case that maybe the forks are wrecked and they
might not need the top clamp? (took me long enough to get around to the
question didn't it?) Or maybe know of a direct replacement in the Kwaka
Don in GJ
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 48845 bytes
Desc: not available
Url : http://www.micapeak.com/pipermail/gpzlist/attachments/20070927/9934dd61/attachment.jpg
More information about the GPZList