bike problem

Dave Daniels dwaynedaniels at sbcglobal.net
Tue Aug 5 15:07:19 PDT 2008


No, but I think you meant water in the gas??

"art.robinson" <art.robinson at rogers.com> wrote:  Have you checked for gas in the water? Try some "gas line antifreeze". I
think its ethylene glycol.

Art Robinson

-----Original Message-----
From: Paul Heim [mailto:SuprHtr at columbus.rr.com] 
Sent: 04 August 2008 22:07
To: GPZ LIST
Subject: Re: bike problem

I had one plug crap up on me a couple of times and cured the problem by 
getting on the bike and riding it really hard until it cleared up. That

being said, I know that some listers recommend replacing the plugs
rather 
than cleaning. If the problem comes back, I'd suspect the plug wire.

Paul in Ohio
----- Original Message ----- 
From: "Dave Daniels" 
To: "GPZ LIST" 
Sent: Monday, August 04, 2008 9:41 PM
Subject: bike problem


> I've been conferring with Dave Beard but thought I'd seek other
opinions 
> as well. My bike started running rough a couple weeks ago on my way
home 
> from work. Actually, it started right when I started it to come home. 
> Sounded like it was running on three cylinders.
>
> Pulled the tank off and the spark plug wires off and gazed down the 
> wells. No. 3 had oil in it, so I figured one of my figure 8 gaskets
went 
> bad.
>
> So, I orderd some new ones and switched them out. Also put in new
plugs. 
> Got it all back together and started it up. It ran fine for a bit then

> started getting rough again.
>
> So, I pulled the plugs again and looked in the wells again. No oil
this 
> time, but no. 4 plug was getting carboned up.
>
> So, I cleaned them off, put them back in, put the tank back on and
hit it 
> again. Ran good for about a minute, then went rough again. So, I got a
can 
> of wd-40 and sprayed it on the exhaust pipes coming out of the head.
It 
> smoke completely off all but no. 4. It just ran down that pipe.
>
> So, it seems no. 4 isn't firing. Any ideas?
>
> Thanks,
> Dave D.
> 





More information about the GPZList mailing list