Front wheel bearings

[Ian Westlake]

Hi Steve ,  bearings are sealed (2RS  twin rubber sealed).Recently  
done mine with 6203-2RSH SKF's on the front 6304-2RSH on the rear & a  
6206-2RSH for the sprocket carrier. They weren't too bad but I had the  
wheels off for a paint up before new tyres so I changed the lot as it  
was less than £30 for the lot. Hope this helps
Ian
95 GPZ

Sent from my iPhone

On 11 May 2009, at 18:19, "Stephen Hampson" <shampson at gmx.co.uk> wrote:

> Had the Gpz in for its annual MOT. It Passed but the tester said  
> there was
> some play in the front wheel bearing and they would need replacing  
> soon.
>
>
>
> The part number is 6203UUC3 presumably this is 6203 single row deep  
> groove,
> c3 clearance.
>
> As I don't want to remove the wheel until I replace the bearing, can  
> any
> tell me if the above is correct and if the bearings are sealed or  
> open?
>
>
>
> Cheers
>
> Steve
>