davidebeard at comcast.net
Tue May 12 04:25:52 PDT 2009
One of the main reasons I went with a Stage 3 jet kit and pods was I was
tired of messing with that airbox. That, and the fact that it woke up the
Jonathon Jay wrote:
Now if someone could come over to my place. My carbs need rebuilt and my jet ki
First time ever for me, I pulled the carbs yesterday and what a BIATCH! Scary p
art will be getting it all back in...
I found out that my bike does not have a silencer, which can only mean one thin
g. CA model. Even though it was imported to Boise and then shipped to Tacoma.
So what in all this mess of emissions stuff do I have to keep? I wanna ditch it
all. I have little canister(S), hoses, stuff coming from the tank, going to th
e fairing... I really just want to pull it all out.
So perhaps some of you can tell me what to yank and what to leave. Also, I have
the block off plates yet uninstalled...
What's The Difference Between Ignorance And Apathy?
~ I Don't Know And I Don't Care ~
Date: Mon, 11 May 2009 19:24:44 -0700
From: dwaynedaniels at sbcglobal.net
Subject: Re: Valves and carb sync afternoon.
To: gpzlist at micapeak.com; dominatr37 at optonline.net
Good luck Ralph!
Tomorrow, I'm jumping on Reserection Red and heading up to Dave Beard's house.
'Bout a 5 or 6 hour ride depending on if I slab it or not. She's all packed and
ready to go. See you tomorrow bro.
--- On Mon, 5/11/09, dominatr37 <dominatr37 at optonline.net> wrote:
From: dominatr37 <dominatr37 at optonline.net>
Subject: Valves and carb sync afternoon.
To: "Kawasaki GPZ1100 discussion" <gpzlist at micapeak.com>
Date: Monday, May 11, 2009, 6:47 PM
Just completed another valve adjustment and a carb sync on the big red machine
and its purring like a kitten now. Several valves had become tight. I changed 6
shims. 1 had become loose. Did a carb sync with my brand new Morgan Carb Tune
that I bought last summer and had never used till now. I actually got the carbs
perfect. All that's left is to change the oil with the new amsoil I ordered
today, and I'll be all set. I also put a new valve cover gasket and figure 8
gaskets in today. The bike should be ready to roll come May 29th. Alabama here
Ralph L. Angelo Jr.
Author of "Help! they're all out to get me!
The motorcyclists guide to surviving the everyday world."
LIMELongriders NEW site;
Insert movie times and more without leaving HotmailÂ®.
1. mailto:dwaynedaniels at sbcglobal.net
2. mailto:gpzlist at micapeak.com
3. mailto:dominatr37 at optonline.net
4. mailto:dominatr37 at optonline.net
5. mailto:dominatr37 at optonline.net
6. mailto:gpzlist at micapeak.com
More information about the GPZList