Front brake - trapped air
dominatr37 at optonline.net
Sat Jul 21 15:31:51 PDT 2012
Loosen the hose fitting up at the reservoir. Tie the brake lever in the
closed (Braking) position with a zip tie. Leave the bike on the center stand
and leave it like this over night. It should clear all the air out by the
morning. Just to double check, with the fitting loose, pump it once or twice
to clear out any air bubbles at the reservoir. If you drain the reservoir
you're going to fill the system with air, so only one or two pumps. You
should sees bubble coming out by the fitting if there is air in there yet.
Once the bubbles stop, re-tighten and re-fill.
Ralph L..Angelo, Jr.
Redemption of the Sorcerer, The Crystalon Saga, Book One.
Help! They're all out to get me! The Motorcyclists Guide to Surviving the
More information about the GPZList