emulator set-up

zoran zv30 at sbcglobal.net
Thu Jun 21 21:03:20 PDT 2007

you dont,oil is only way.
rods may look same but what matters is ring seal on top of rod and clearance 
between rod and inner fork tube seal.this is where oil leaks through on 
Zoran Vujasinovic
Twin Works Factory
----- Original Message ----- 
From: "Doug Pippin" <d_pippin_89 at bellsouth.net>
To: <sv650 at micapeak.com>
Sent: Thursday, June 21, 2007 7:06 PM
Subject: Re: emulator set-up

> OK Zoran, please tell me how I'd adjust the rebound damping on an 03 or 
> newer without using heavier oil.
> The damping rods are almost identical to the 1st gen forks.
> Doug in NC
> At 03:00 PM 6/21/2007, you wrote:
>>Date: Wed, 20 Jun 2007 16:29:41 -0700
>>From: "zoran" <zv30 at sbcglobal.net>
>>Subject: Re: emulator set-up
>>To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>>Message-ID: <001c01c7b392$e1abfa90$6501a8c0 at zman>
>>Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>>         reply-type=response
>>you will,03 and newer.
>>Zoran Vujasinovic
>>Twin Works Factory
> Doug Pippin
> 828-684-8488
> <mailto:>d_pippin_89<mailto:>@bellsouth.net
> ----------

More information about the SV650 mailing list