Heavy clutch

[zoran]

when cable is good screw mechanizam is usualy problem.



Zoran Vujasinovic
Twin Works Factory
775-690-5171
http://www.twfracing.com/index.html
----- Original Message ----- 
From: "Greg McCullough" <greg at developingmedia.com>
To: <sv650 at micapeak.com>
Sent: Wednesday, November 14, 2007 5:38 PM
Subject: Heavy clutch


> The clutch on the race bike has been getting continually heavier through 
> the
> year.  At this point it's pretty much the heaviest clutch I've felt on an
> SV.
>
>
>
> Details:
>
> -          Lever/perch moves freely
>
> -          The cable is the new motion pro (routed between the fork tubes,
> right side of the steering head, then between the carbs)
>
> -          The screw assembly has fresh bearings, grease, and is correctly
> adjusted.
>
> -          Barnett plates
>
> -          I recently swapped from Barnett springs to stock springs, with 
> no
> effect.
>
>
>
> There is some notching of the clutch basket fingers.  Is that a possible
> culprit?  That doesn't seem right to me, since the clutch feels the same 
> on
> / off / in gear / out of gear
>
>
>
> Other ideas?
>
>
>
> Thanks,
> Greg
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.503 / Virus Database: 269.15.31/1130 - Release Date: 
> 11/14/2007 9:27 AM
>
>