SV650 Digest, Vol 11, Issue 15

[zoran]

it is not that expensive.$200 would get you set up.


Zoran Vujasinovic
Twin Works Factory
775-690-5171
http://www.twfracing.com/index.html
----- Original Message ----- 
From: "Brian Bonner" <indy1992 at hotmail.com>
To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
Sent: Wednesday, October 17, 2007 1:21 PM
Subject: RE: SV650 Digest, Vol 11, Issue 15


I'll probably leave it with Peter at GMD Computrack Boston for a while and 
then go rob a bank to pay the ransom ;-)Brian B.

> From: zv30 at sbcglobal.net> To: sv650 at micapeak.com> Subject: Re: SV650 
> Digest, Vol 11, Issue 15> Date: Wed, 17 Oct 2007 13:10:29 -0700> > 01 
> gsxr600 uses different spring rate and valving on shock than what you > 
> need.> you should fix shock(if not set up for sv) and put stock dog bones 
> on.> > > Zoran Vujasinovic> Twin Works Factory> 775-690-5171> 
> http://www.twfracing.com/index.html> ----- Original Message ----- > From: 
> "Brian Bonner" <indy1992 at hotmail.com>> To: "Suzuki SV650 Mailing List" 
> <sv650 at micapeak.com>> Sent: Wednesday, October 17, 2007 1:00 PM> Subject: 
> RE: SV650 Digest, Vol 11, Issue 15> > > Zoran, I don't have the GSXR shock 
> on it anymore. I have a Penske twin > clicker that came off of an '01 GSXR 
> 600.> The dogbones are maybe an inch longer than stock. The front forks 
> are > dropped about an inch in the triple clamps.Brian B.> > > > > >

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.14.13/1075 - Release Date: 10/17/2007 
9:38 AM