G1 won't stay running

[Ernest Montague]

Did it ever start properly with the cam swap and flatties?

IF so, first thing I would check is loose coil connections.


On Sep 9, 2007, at 6:07 PM, MikeJ735 at aol.com wrote:

> I have an 01 with flatslides and the G2 intake swap.  The bike  
> doesn't start
> unless I have almost full throttle and then back it off a bit once  it 
> does
> start.  Won't stay running unless I hold the throttle open  either.  
> My trouble
> shooting so far has been to check the plugs, drain the  bowls, new gas,
> adjusted the idle high, and just a general cleaning of the  carbs.  
> All to no
> avail.  Battery is charged also.   With  the tank up while starting it 
> seems like
> there is a lot of fuel kind of  "misting" from the carbs.  Also a 
> slight smell
> of oil?   Any  ideas?
>
>
>
> ************************************** See what's new at 
> http://www.aol.com
>