more 2000/2001 SV parts in FL

Erik Weber yoober at gmail.com
Mon Apr 21 18:36:13 PDT 2008


Hey, I need a 1st gen front fender. If it's in one piece I'll take it.
I'm in Atlanta.

Thanks,
Erik


On 4/21/08, Vero Anderson <vero at thorasaurus.com> wrote:
>
>  I made a finer pass through my remaining 2000/2001 SV650 parts and found
> the following that really deserve a nice home.  Make me an offer, as long as
> I get at least $10 or $20 out of the deal (after shipping) I'll probably
> take it, but I'll obviously give preference to making a few more bucks than
> sticking it all in one box for $20!  One exception is the brand new SVS
> brake master cylinder set, it will go on eBay before it goes anywhere for
> $20.
>
>  The parts:
>
>  one complete set (2 of each) spark plug coils and wires
>
>  front brake master cylinder set for SVS, brand new, never used, everything
> is sealed or caps never off.  Includes everything but the brake lever and
> brake light switch, I'd be using it except the reservoir wants to be bolted
> to a stock SVS clipon that I don't have.  Includes the tube that connects
> the master to the reservior, I just forgot it in the picture, it is also
> new, sealed in a Suzuki bag.
>
>  clutch cable for unfaired bike (the right-angle tube looks bad, but it's
> structurally sound and the cable is fine)
>
>  Woodcraft left-side rear-set bracket only (note they made two styles, if
> you're concerned what this is I can take a closer picture with measurements)
> (I think it goes with this kit:
> http://www.woodcraft-cfm.com/Scripts/prodView.asp?idproduct=17592
> but don't quote me on that) (yes, I managed to destroy a Woodcraft
> right-side rear-set bracket..)
>
>  Daytona steering dampener and mounting bracket (includes mounts for the
> front of the bike, I made it work with a fairing stay with the ugly
> angle-iron bracket, the pretty one wasn't compatible with my bodywork)
>
>  speedo pickup eliminator by pit-bull
>
>  stock front brakes. These are still hooked up with brake lines as shown, I
> can seperate the calipers and master if you really want.  the master has
> some gunk visible (brake fluid is a few years old). Includes pads with a
> decent bit of life left.  Some corrosion as you can see, plus some on the
> exposed portion of the pistons that might be worth cleaning up. Reservoir
> cap isn't ground down like the one on my streetbike!  Willing to swap caps
> if you want "I've crashed!" street cred.
>
>  right-hand control box switch thing (I'll include the throttle cables, but
> notice that the plastic housing on one may be broken)
>
>  speedo pickup
>
>  clutch lever perch (no lever)
>
>  stock rear brake caliper
>
>  stock airbox
>
>  front axle
>
>  rear axle w/ spacers and bolt
>
>  left-hand control switch box thing
>
>  stock fender (that's mud on it, it's in decent shape)
>
>  The DL1000 kickstand and Ford Focus rear tire are NOT for sale.
>
>  The picture:
>
>  http://www.thorasaurus.com/sv_parts_big/IMG_0332.JPG
>
>  -Vero
>


More information about the SV650 mailing list