Head bolt problem

zoran zv30 at sbcglobal.net
Fri Aug 1 12:26:36 PDT 2008


ok.just tried to tell you 02 do that :)
why not,get insert.


Zoran Vujasinovic
Twin Works Factory
775-786-4881
www.twfracing.com 
----- Original Message ----- 
From: "Ernest Montague" <afm199 at earthlink.net>
To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
Sent: Friday, August 01, 2008 12:15 PM
Subject: Re: Head bolt problem


> Retainer is not the problem, I can get it out.
> 
> I also overtorqued a head bolt and fucked up the threads in the case... 
> wondering if I can get an insert.
> 
> Ernie
> 
> 
> On Aug 1, 2008, at 12:01 PM, zoran wrote:
> 
>> retainer is in head,not cases.
>>
>>
>> Zoran Vujasinovic
>> Twin Works Factory
>> 775-786-4881
>> www.twfracing.com ----- Original Message ----- From: "Ernest Montague" 
>> <afm199 at earthlink.net>
>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>> Sent: Friday, August 01, 2008 11:57 AM
>> Subject: Re: Head bolt problem
>>
>>
>>> I have a set of heads like that.... But these cases are not the 
>>> same.These are ones you sold me a year or two ago
>>> Ernie
>>> On Aug 1, 2008, at 11:46 AM, zoran wrote:
>>>> it is easy to tell 02 from others.there is no bolt between cam 
>>>> sprocket.the one from outside of head keeping chain from falling 
>>>> down when you take cams out.
>>>>
>>>>
>>>> Zoran Vujasinovic
>>>> Twin Works Factory
>>>> 775-786-4881
>>>> www.twfracing.com
>>>> ----- Original Message ----- From: "Ernest Montague" 
>>>> <afm199 at earthlink.net>
>>>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>>>> Sent: Friday, August 01, 2008 11:37 AM
>>>> Subject: Re: Head bolt problem
>>>>
>>>>
>>>>> I don't think so,  more like 2000, I can check the number
>>>>>
>>>>>
>>>>> On Aug 1, 2008, at 11:13 AM, zoran wrote:
>>>>>
>>>>>> is it 02?
>>>>>>
>>>>>>
>>>>>> Zoran Vujasinovic
>>>>>> Twin Works Factory
>>>>>> 775-786-4881
>>>>>> www.twfracing.com ----- Original Message ----- From: "Ernest 
>>>>>> Montague" <afm199 at earthlink.net>
>>>>>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>>>>>> Sent: Friday, August 01, 2008 10:51 AM
>>>>>> Subject: Re: Head bolt problem
>>>>>>
>>>>>>
>>>>>>> 99-02
>>>>>>> On Aug 1, 2008, at 10:49 AM, zoran wrote:
>>>>>>>> 02?
>>>>>>>>
>>>>>>>>
>>>>>>>> Zoran Vujasinovic
>>>>>>>> Twin Works Factory
>>>>>>>> 775-786-4881
>>>>>>>> www.twfracing.com ----- Original Message ----- From: "Ernest 
>>>>>>>> Montague" <afm199 at earthlink.net>
>>>>>>>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>>>>>>>> Sent: Friday, August 01, 2008 8:35 AM
>>>>>>>> Subject: Head bolt problem
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>> Interesting thing also happened. One valve broke the retainer ( 
>>>>>>>>> collets in place, the retainer just broke around the inner 
>>>>>>>>> valve spring, so when I pulled the cam the bucket popped up a 
>>>>>>>>> half inch) There is a perfect circle in the retainer, it is 
>>>>>>>>> mashed into the bucket, and I could pull out the spring by 
>>>>>>>>> hand. No head or valve damage.
>>>>>>>>> Ernie
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>
>>>
>>
>


More information about the SV650 mailing list