base gasket

[Randy Grein]

Um, yeah - sounds worse in English measurements, about 1.4 inches. I'm  
sure it was meant as something like .34 mm.
Randy Grein, WMRRA #41

On Dec 19, 2008, at 10:27 PM, zoran wrote:

> I would think with that clearance you can safely mill it 34mm :)
>
>
> Zoran Vujasinovic
> Twin Works Factory
> 775-786-4881
> www.twfracing.com
> ----- Original Message ----- From: "Ernest Montague" <afm199 at earthlink.net 
> >
>
>
>
> I am seeing 35 mm piston to head
>> clearance