emulators

[Randy Grein]

That was Max's recommendation as well. He did say some experimentation  
was essential as there is quite a bit of viscosity variation between  
brands of oil.
Randy Grein, WMRRA #41

On Jan 12, 2008, at 4:41 PM, Donald Cook wrote:

> 20 wt. is a good starting point.  With .95 springs (I weigh 200lbs)  
> I used 2 parts 30wt. and 1 part 20 wt. to get to about 25wt.
>
> On Jan 12, 2008, at 5:32 PM, Ernest Montague wrote:
>
>> Hey guys:
>>
>> i am setting up some forks for the upcoming season with emulators  
>> for the new production 650 class.
>>
>> I seem to remember a workable oil viscosity was around 22-25, any  
>> suggestions appreciated.
>>
>> Emulators, .85 springs and  rebound hole on damping rod brazed shut.
>>
>> Thanks
>>
>> Ernie
>>
>