emulators

Erik Weber yoober at gmail.com
Thu Jan 17 11:32:04 PST 2008


Thanks, I will take a look when I get home.

On 1/17/08, zoran <zv30 at sbcglobal.net> wrote:
> you need 10mm of treads still inside of the body of shock.
>
>
> Zoran Vujasinovic
> Twin Works Factory
> 775-690-5171
> http://www.twfracing.com/index.html
> ----- Original Message -----
> From: "Erik Weber" <yoober at gmail.com>
> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> Sent: Thursday, January 17, 2008 11:24 AM
> Subject: Re: emulators
>
>
> > Penske double-clicker set up by Z. Weight is for 170.
> >
> > But, as I recall, the ride height was about maxed out . . . Zoran told
> > me where to set it and I can't remember how many turns it was, but
> > there weren't many threads left. There were a few though. Wonder if I
> > could go a little higher.
> >
> > On 1/17/08, Ernest Montague <afm199 at earthlink.net> wrote:
> >> Then it is probably ride height .  What length shock and what spring
> >> rate, what do you weigh?
> >>
> >>
> >> On Jan 17, 2008, at 11:12 AM, Erik Weber wrote:
> >>
> >> > I have adapters, 1 inch up and 1 inch back. The most I've seen
> >> > rearsets offer is 1.5 inches up and 1 inch back (or was it 1 inch up
> >> > and 1.5 inches back?). I guess that half inch will maybe make the
> >> > difference. But, unlike everyone else I guess, I like my folding pegs.
> >> > I haven't seen any rearsets that let you keep the stock (or OEM
> >> > replacement) pegs. Maybe I should look again.
> >> >
> >> >
> >> > On 1/17/08, Randy Grein <randygrein at comcast.net> wrote:
> >> >> One word: Rearsets.
> >> >>
> >> >> Impossible to drag those pegs...
> >> >>
> >> >> Randy Grein, WMRRA #41
> >> >>
> >> >> On Jan 16, 2008, at 1:16 PM, Erik Weber wrote:
> >> >>
> >> >>> Thanks Jo. I have considered dropping the front, but really what I
> >> >>> was
> >> >>> getting at was that I'm a lean angle junkie. :) Even when riding hard
> >> >>> enough to scrape the pegs pretty good there is still about 1/8-inch
> >> >>> of
> >> >>> the rear tire I'm not using.
> >> >>>
> >> >>> On 1/15/08, Jo Rhett <jorhett at fastlizardracing.com> wrote:
> >> >>>> On Jan 15, 2008, at 4:54 PM, Erik Weber wrote:
> >> >>>>> The only thing I know for sure I want is more ride height.
> >> >>>>
> >> >>>>
> >> >>>> You can drop the forks in the triple tree to get better dynamics.  I
> >> >>>> found after a while more ride height just caused me to spin up the
> >> >>>> rear more, so I ended up dropping the front instead which worked out
> >> >>>> fine.  My final adjustment was like 8mm showing through the triple
> >> >>>> tree and that's how I like it.
> >> >>>>
> >> >>>> --
> >> >>>> Jo Rhett /  velociRaptor Racing
> >> >>>> #553 WERA West / AFM
> >> >>>> #5 SMRRC
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>>>
> >> >>
> >> >>
> >> >
> >>
> >>
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.516 / Virus Database: 269.19.6/1229 - Release Date: 1/17/2008
> > 11:12 AM
> >
> >
>
>


More information about the SV650 mailing list