emulators

zoran zv30 at sbcglobal.net
Thu Jan 17 11:48:15 PST 2008


you can go up to 14 inch free length.
13 3/4-14 is what everybody is at depending on tires.
with 180 I run around 13 3/4-13 7/8 and with 160 at 14.



Zoran Vujasinovic
Twin Works Factory
775-690-5171
http://www.twfracing.com/index.html
----- Original Message ----- 
From: "Erik Weber" <yoober at gmail.com>
To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
Sent: Thursday, January 17, 2008 11:39 AM
Subject: Re: emulators


> 2001.
>
> On 1/17/08, zoran <zv30 at sbcglobal.net> wrote:
>> 1st or 2nd gen sv?
>>
>>
>> Zoran Vujasinovic
>> Twin Works Factory
>> 775-690-5171
>> http://www.twfracing.com/index.html
>> ----- Original Message -----
>> From: "Erik Weber" <yoober at gmail.com>
>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>> Sent: Thursday, January 17, 2008 11:32 AM
>> Subject: Re: emulators
>>
>>
>> > Thanks, I will take a look when I get home.
>> >
>> > On 1/17/08, zoran <zv30 at sbcglobal.net> wrote:
>> >> you need 10mm of treads still inside of the body of shock.
>> >>
>> >>
>> >> Zoran Vujasinovic
>> >> Twin Works Factory
>> >> 775-690-5171
>> >> http://www.twfracing.com/index.html
>> >> ----- Original Message -----
>> >> From: "Erik Weber" <yoober at gmail.com>
>> >> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>> >> Sent: Thursday, January 17, 2008 11:24 AM
>> >> Subject: Re: emulators
>> >>
>> >>
>> >> > Penske double-clicker set up by Z. Weight is for 170.
>> >> >
>> >> > But, as I recall, the ride height was about maxed out . . . Zoran 
>> >> > told
>> >> > me where to set it and I can't remember how many turns it was, but
>> >> > there weren't many threads left. There were a few though. Wonder if 
>> >> > I
>> >> > could go a little higher.
>> >> >
>> >> > On 1/17/08, Ernest Montague <afm199 at earthlink.net> wrote:
>> >> >> Then it is probably ride height .  What length shock and what 
>> >> >> spring
>> >> >> rate, what do you weigh?
>> >> >>
>> >> >>
>> >> >> On Jan 17, 2008, at 11:12 AM, Erik Weber wrote:
>> >> >>
>> >> >> > I have adapters, 1 inch up and 1 inch back. The most I've seen
>> >> >> > rearsets offer is 1.5 inches up and 1 inch back (or was it 1 inch 
>> >> >> > up
>> >> >> > and 1.5 inches back?). I guess that half inch will maybe make the
>> >> >> > difference. But, unlike everyone else I guess, I like my folding
>> >> >> > pegs.
>> >> >> > I haven't seen any rearsets that let you keep the stock (or OEM
>> >> >> > replacement) pegs. Maybe I should look again.
>> >> >> >
>> >> >> >
>> >> >> > On 1/17/08, Randy Grein <randygrein at comcast.net> wrote:
>> >> >> >> One word: Rearsets.
>> >> >> >>
>> >> >> >> Impossible to drag those pegs...
>> >> >> >>
>> >> >> >> Randy Grein, WMRRA #41
>> >> >> >>
>> >> >> >> On Jan 16, 2008, at 1:16 PM, Erik Weber wrote:
>> >> >> >>
>> >> >> >>> Thanks Jo. I have considered dropping the front, but really 
>> >> >> >>> what I
>> >> >> >>> was
>> >> >> >>> getting at was that I'm a lean angle junkie. :) Even when 
>> >> >> >>> riding
>> >> >> >>> hard
>> >> >> >>> enough to scrape the pegs pretty good there is still about
>> >> >> >>> 1/8-inch
>> >> >> >>> of
>> >> >> >>> the rear tire I'm not using.
>> >> >> >>>
>> >> >> >>> On 1/15/08, Jo Rhett <jorhett at fastlizardracing.com> wrote:
>> >> >> >>>> On Jan 15, 2008, at 4:54 PM, Erik Weber wrote:
>> >> >> >>>>> The only thing I know for sure I want is more ride height.
>> >> >> >>>>
>> >> >> >>>>
>> >> >> >>>> You can drop the forks in the triple tree to get better 
>> >> >> >>>> dynamics.
>> >> >> >>>> I
>> >> >> >>>> found after a while more ride height just caused me to spin up
>> >> >> >>>> the
>> >> >> >>>> rear more, so I ended up dropping the front instead which 
>> >> >> >>>> worked
>> >> >> >>>> out
>> >> >> >>>> fine.  My final adjustment was like 8mm showing through the
>> >> >> >>>> triple
>> >> >> >>>> tree and that's how I like it.
>> >> >> >>>>
>> >> >> >>>> --
>> >> >> >>>> Jo Rhett /  velociRaptor Racing
>> >> >> >>>> #553 WERA West / AFM
>> >> >> >>>> #5 SMRRC
>> >> >> >>>>
>> >> >> >>>>
>> >> >> >>>>
>> >> >> >>>>
>> >> >> >>>>
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> > --
>> >> > No virus found in this incoming message.
>> >> > Checked by AVG Free Edition.
>> >> > Version: 7.5.516 / Virus Database: 269.19.6/1229 - Release Date:
>> >> > 1/17/2008
>> >> > 11:12 AM
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>> > --
>> > No virus found in this incoming message.
>> > Checked by AVG Free Edition.
>> > Version: 7.5.516 / Virus Database: 269.19.6/1229 - Release Date: 
>> > 1/17/2008
>> > 11:12 AM
>> >
>> >
>>
>>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.19.6/1229 - Release Date: 1/17/2008 
> 11:12 AM
>
> 



More information about the SV650 mailing list