Penske ride height increment

[Randy Grein]

Think for a moment - the clevis will increment by HALF turn (twist the  
top if you have to), but there's approximately 3:1 mechanical  
advantage, so the minimum ride height adjustment is 1.5mm. If that's  
too much your butt is better tuned than mine.

Randy Grein, WMRRA #41

On Jul 21, 2008, at 5:20 PM, Erik Weber wrote:

> I guess I could live with 1 mm. I don't want to go any more than that.
>
> On 7/21/08, Ernest Montague <afm199 at earthlink.net> wrote:
>> Trying to remember if the clevis is  threaded, if so yeah one turn  
>> min
>>
>>
>>
>> On Jul 21, 2008, at 5:15 PM, Erik Weber wrote:
>>
>>> Cool!
>>>
>>> I was thinking it had to be one full turn and so thought it would  
>>> be a
>>> good bit more than that.
>>>
>>> Thanks,
>>> Erik
>>>
>>> On 7/21/08, Ernest Montague <afm199 at earthlink.net> wrote:
>>>
>>>> As little as you want. IIRC one turn of the clevis is 1 mm  
>>>> raise.  So a
>> half
>>>> turn would be a half mm
>>>>
>>>>
>>>>
>>>> On Jul 21, 2008, at 5:06 PM, Erik Weber wrote:
>>>>
>>>>
>>>>> Can anyone tell me what is the smallest unit of adjustment in ride
>>>>> height available on the Penske double clicker on a first gen?
>>>>>
>>>>> Thanks,
>>>>> Erik
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>>