Penske ride height increment

Ernest Montague afm199 at earthlink.net
Mon Jul 21 21:25:00 PDT 2008


Yep. I notice adjustments of 3 mm or more at the clevis. Anything less 
than that I don't notice.


On Jul 21, 2008, at 9:04 PM, Randy Grein wrote:

> Think for a moment - the clevis will increment by HALF turn (twist the 
> top if you have to), but there's approximately 3:1 mechanical 
> advantage, so the minimum ride height adjustment is 1.5mm. If that's 
> too much your butt is better tuned than mine.
>
> Randy Grein, WMRRA #41
>
> On Jul 21, 2008, at 5:20 PM, Erik Weber wrote:
>
>> I guess I could live with 1 mm. I don't want to go any more than that.
>>
>> On 7/21/08, Ernest Montague <afm199 at earthlink.net> wrote:
>>> Trying to remember if the clevis is  threaded, if so yeah one turn 
>>> min
>>>
>>>
>>>
>>> On Jul 21, 2008, at 5:15 PM, Erik Weber wrote:
>>>
>>>> Cool!
>>>>
>>>> I was thinking it had to be one full turn and so thought it would 
>>>> be a
>>>> good bit more than that.
>>>>
>>>> Thanks,
>>>> Erik
>>>>
>>>> On 7/21/08, Ernest Montague <afm199 at earthlink.net> wrote:
>>>>
>>>>> As little as you want. IIRC one turn of the clevis is 1 mm raise.  
>>>>> So a
>>> half
>>>>> turn would be a half mm
>>>>>
>>>>>
>>>>>
>>>>> On Jul 21, 2008, at 5:06 PM, Erik Weber wrote:
>>>>>
>>>>>
>>>>>> Can anyone tell me what is the smallest unit of adjustment in ride
>>>>>> height available on the Penske double clicker on a first gen?
>>>>>>
>>>>>> Thanks,
>>>>>> Erik
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>



More information about the SV650 mailing list