Penske ride height increment

[zoran]

that is if you can remember you just adjusted it :)


Zoran Vujasinovic
Twin Works Factory
775-786-4881
www.twfracing.com 
----- Original Message ----- 
From: "Ernest Montague" <afm199 at earthlink.net>
To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
Sent: Monday, July 21, 2008 9:25 PM
Subject: Re: Penske ride height increment


> Yep. I notice adjustments of 3 mm or more at the clevis. Anything less 
> than that I don't notice.
> 
> 
> On Jul 21, 2008, at 9:04 PM, Randy Grein wrote:
> 
>> Think for a moment - the clevis will increment by HALF turn (twist the 
>> top if you have to), but there's approximately 3:1 mechanical 
>> advantage, so the minimum ride height adjustment is 1.5mm. If that's 
>> too much your butt is better tuned than mine.
>>
>> Randy Grein, WMRRA #41
>>
>> On Jul 21, 2008, at 5:20 PM, Erik Weber wrote:
>>
>>> I guess I could live with 1 mm. I don't want to go any more than that.
>>>
>>> On 7/21/08, Ernest Montague <afm199 at earthlink.net> wrote:
>>>> Trying to remember if the clevis is  threaded, if so yeah one turn 
>>>> min
>>>>
>>>>
>>>>
>>>> On Jul 21, 2008, at 5:15 PM, Erik Weber wrote:
>>>>
>>>>> Cool!
>>>>>
>>>>> I was thinking it had to be one full turn and so thought it would 
>>>>> be a
>>>>> good bit more than that.
>>>>>
>>>>> Thanks,
>>>>> Erik
>>>>>
>>>>> On 7/21/08, Ernest Montague <afm199 at earthlink.net> wrote:
>>>>>
>>>>>> As little as you want. IIRC one turn of the clevis is 1 mm raise.  
>>>>>> So a
>>>> half
>>>>>> turn would be a half mm
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Jul 21, 2008, at 5:06 PM, Erik Weber wrote:
>>>>>>
>>>>>>
>>>>>>> Can anyone tell me what is the smallest unit of adjustment in ride
>>>>>>> height available on the Penske double clicker on a first gen?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Erik
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>
>