Cam Timing Problems

[zoran]

no.rear is 270 away from front.
360 is just where you set cams,not TDC.


Zoran Vujasinovic
Twin Works Factory
775-786-4881
www.twfracing.com
----- Original Message ----- 
From: "Steve Robertson" <srobertson at ssimicro.com>
To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
Sent: Friday, October 10, 2008 9:34 PM
Subject: Re: Cam Timing Problems


>I agree the numbers are very high, especially the closing numbers. If
> the front cylinder is at TDC and I rotate the crank 360deg is the rear
> cylinder at TDC? If not, that is where my problem is and I will have
> to adjust my degree wheel.
>
>
>> not necesary cams wrong,reading numbers from wheel.you are way off there.
>>
>> Zoran
>