help with Zoran's custom triples bearing on G1
Mike Carter, Jr.
wacky_woodchuck at yahoo.com
Mon Sep 1 18:00:11 PDT 2008
You have to pull the old bearing outer ring out of there. Just remove the stem and bang it out from below.
Then to knock it back in, just use the old bearing and a block of wood.
----- Original Message ----
From: matthew patton <pattonme at yahoo.com>
To: sv650 at micapeak.com
Cc: zv30 at sbcglobal.net
Sent: Monday, September 1, 2008 8:39:28 PM
Subject: help with Zoran's custom triples bearing on G1
is the custom bearing for the use of 01-03 GSXR 750 triples supposed to be the top bearing? I have NOT removed any stock bearing races. it looks like the new bearing's race is a press fit into the headstock onto the top of the stock race which is for a ball bearing. do I just put a block of wood across it and bang it in? Or do I have to pull the top race too?
More information about the SV650