Gen2 fork disassembly

[Ernest Montague]

Find 12mm allen wrench to remove axle.

sounds good.  You have to slam them apart to force out the seal.   
Replace that crush washer or at least anneal it.  I had one leak on me 
when I reused it.


On Jul 2, 2009, at 7:56 AM, Steve Robertson wrote:

> I managed to tweak my upper tubes and lower triple clamp and don't 
> have a
> manual handy. Does this sound right? Please feel free to 
> add/remove/correct
>
> #1 remove fork caps/spacers/springs and drain oil
>
> #2 remove dust cover and clip above fork seal
>
> #3 remove bolt in bottom of leg that holds damper rod, remove rod
>
> #4 pull upper and lower tubes apart
>
>
> thanks
>
>