Gen2 fork disassembly

[Wendell Crain]

I normally hit the fork drain bolt first with my impact while the fork is still together. Frequently I get lucky and the bolt will start to come out without having to hold the damper rod with the Suzuki special tool or an improvised tool.
 
> From: srobertson at ssimicro.com
> To: sv650 at micapeak.com
> Subject: Gen2 fork disassembly
> Date: Thu, 2 Jul 2009 08:56:51 -0600
> 
> I managed to tweak my upper tubes and lower triple clamp and don't have a
> manual handy. Does this sound right? Please feel free to add/remove/correct
> 
> #1 remove fork caps/spacers/springs and drain oil
> 
> #2 remove dust cover and clip above fork seal
> 
> #3 remove bolt in bottom of leg that holds damper rod, remove rod
> 
> #4 pull upper and lower tubes apart
> 
> 
> thanks
> 
> 

_________________________________________________________________
Hotmail® has ever-growing storage! Don’t worry about storage limits. 
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutorial_Storage_062009