first gen cam end-play

Ted Temple lrrs52 at yahoo.com
Fri Apr 30 09:05:27 PDT 2010


Just pull the guide and look on the inside.  It will be pretty clear if the chain was scraping it.  I actually drill the holes just a bit larger so I can give the guide a little more clearance.

Ted Temple
LRRS #52 - WERA #552
Sponsored By: 
Spears Enterprises - www.SpearsEnterprises.com  
Street & Competition - www.streetandcomp.com
Woodcraft - www.woodcraft-cfm.com


--- On Fri, 4/30/10, Morgan Jones <morgan at morganjones.org> wrote:

> From: Morgan Jones <morgan at morganjones.org>
> Subject: Re: first gen cam end-play
> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> Date: Friday, April 30, 2010, 1:28 AM
> Thanks Ted and Ernie--I'll give it a
> look this weekend and report back.
> 
> -morgan
> 
> 
> On Apr 29, 2010, at 12:19 PM, Ted Temple wrote:
> 
> > That was my first thought as well Ernie.  Makes a
> hell of a racket but easliy fixed by sliding that guide to
> the outside as far as it will go.
> > 
> > Ted Temple
> > LRRS #52 - WERA #552
> > Sponsored By: 
> > Spears Enterprises - www.SpearsEnterprises.com  
> > Street & Competition - www.streetandcomp.com
> > Woodcraft - www.woodcraft-cfm.com
> > 
> > 
> > --- On Thu, 4/29/10, Ernest Montague <afm199 at earthlink.net>
> wrote:
> > 
> >> From: Ernest Montague <afm199 at earthlink.net>
> >> Subject: Re: first gen cam end-play
> >> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> >> Date: Thursday, April 29, 2010, 10:52 AM
> >> There might be a tiny bit of play.
> >> Are the cam sprocket bolts hitting the cam chain
> guard? (
> >> the piece that covers the cam chain and has three
> bolts
> >> holding it down). That is common.
> >> On Apr 29, 2010, at 7:45 AM, Morgan Jones wrote:
> >> 
> > 
> > 
> > 
> > 
> 
> 


      


More information about the SV650 mailing list