first gen cam end-play

Ernest Montague afm199 at earthlink.net
Fri Apr 30 09:32:47 PDT 2010


Yep, and the adjuster bolts on the sprocket will be scuffed on one side 
and across the top. But IIRC the yosh cams came with pressed no 
sprockets so unless they were replaced with adjustable this is not the 
problem


On Apr 30, 2010, at 9:05 AM, Ted Temple wrote:

> Just pull the guide and look on the inside.  It will be pretty clear 
> if the chain was scraping it.  I actually drill the holes just a bit 
> larger so I can give the guide a little more clearance.
>
> Ted Temple
> LRRS #52 - WERA #552
> Sponsored By:
> Spears Enterprises - www.SpearsEnterprises.com
> Street & Competition - www.streetandcomp.com
> Woodcraft - www.woodcraft-cfm.com
>
>
> --- On Fri, 4/30/10, Morgan Jones <morgan at morganjones.org> wrote:
>
>> From: Morgan Jones <morgan at morganjones.org>
>> Subject: Re: first gen cam end-play
>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>> Date: Friday, April 30, 2010, 1:28 AM
>> Thanks Ted and Ernie--I'll give it a
>> look this weekend and report back.
>>
>> -morgan
>>
>>
>> On Apr 29, 2010, at 12:19 PM, Ted Temple wrote:
>>
>>> That was my first thought as well Ernie.  Makes a
>> hell of a racket but easliy fixed by sliding that guide to
>> the outside as far as it will go.
>>>
>>> Ted Temple
>>> LRRS #52 - WERA #552
>>> Sponsored By:
>>> Spears Enterprises - www.SpearsEnterprises.com 
>>> Street & Competition - www.streetandcomp.com
>>> Woodcraft - www.woodcraft-cfm.com
>>>
>>>
>>> --- On Thu, 4/29/10, Ernest Montague <afm199 at earthlink.net>
>> wrote:
>>>
>>>> From: Ernest Montague <afm199 at earthlink.net>
>>>> Subject: Re: first gen cam end-play
>>>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>>>> Date: Thursday, April 29, 2010, 10:52 AM
>>>> There might be a tiny bit of play.
>>>> Are the cam sprocket bolts hitting the cam chain
>> guard? (
>>>> the piece that covers the cam chain and has three
>> bolts
>>>> holding it down). That is common.
>>>> On Apr 29, 2010, at 7:45 AM, Morgan Jones wrote:
>>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
>
>



More information about the SV650 mailing list