first gen cam end-play

Ted Temple lrrs52 at yahoo.com
Fri Apr 30 11:32:47 PDT 2010


Can't comment on that - I've only ever seen Spears cams... :-)

Ted Temple
LRRS #52 - WERA #552
Sponsored By: 
Spears Enterprises - www.SpearsEnterprises.com  
Street & Competition - www.streetandcomp.com
Woodcraft - www.woodcraft-cfm.com


--- On Fri, 4/30/10, Ernest Montague <afm199 at earthlink.net> wrote:

> From: Ernest Montague <afm199 at earthlink.net>
> Subject: Re: first gen cam end-play
> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> Date: Friday, April 30, 2010, 12:32 PM
> Yep, and the adjuster bolts on the
> sprocket will be scuffed on one side 
> and across the top. But IIRC the yosh cams came with
> pressed no 
> sprockets so unless they were replaced with adjustable this
> is not the 
> problem
> 
> 
> On Apr 30, 2010, at 9:05 AM, Ted Temple wrote:
> 
> > Just pull the guide and look on the inside.  It
> will be pretty clear 
> > if the chain was scraping it.  I actually drill
> the holes just a bit 
> > larger so I can give the guide a little more
> clearance.
> >
> > Ted Temple
> > LRRS #52 - WERA #552
> > Sponsored By:
> > Spears Enterprises - www.SpearsEnterprises.com
> > Street & Competition - www.streetandcomp.com
> > Woodcraft - www.woodcraft-cfm.com
> >
> >
> > --- On Fri, 4/30/10, Morgan Jones <morgan at morganjones.org>
> wrote:
> >
> >> From: Morgan Jones <morgan at morganjones.org>
> >> Subject: Re: first gen cam end-play
> >> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> >> Date: Friday, April 30, 2010, 1:28 AM
> >> Thanks Ted and Ernie--I'll give it a
> >> look this weekend and report back.
> >>
> >> -morgan
> >>
> >>
> >> On Apr 29, 2010, at 12:19 PM, Ted Temple wrote:
> >>
> >>> That was my first thought as well Ernie. 
> Makes a
> >> hell of a racket but easliy fixed by sliding that
> guide to
> >> the outside as far as it will go.
> >>>
> >>> Ted Temple
> >>> LRRS #52 - WERA #552
> >>> Sponsored By:
> >>> Spears Enterprises -
> www.SpearsEnterprises.com 
> >>> Street & Competition -
> www.streetandcomp.com
> >>> Woodcraft - www.woodcraft-cfm.com
> >>>
> >>>
> >>> --- On Thu, 4/29/10, Ernest Montague <afm199 at earthlink.net>
> >> wrote:
> >>>
> >>>> From: Ernest Montague <afm199 at earthlink.net>
> >>>> Subject: Re: first gen cam end-play
> >>>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> >>>> Date: Thursday, April 29, 2010, 10:52 AM
> >>>> There might be a tiny bit of play.
> >>>> Are the cam sprocket bolts hitting the cam
> chain
> >> guard? (
> >>>> the piece that covers the cam chain and
> has three
> >> bolts
> >>>> holding it down). That is common.
> >>>> On Apr 29, 2010, at 7:45 AM, Morgan Jones
> wrote:
> >>>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
> >
> >
> 
> 


      


More information about the SV650 mailing list