jetting/carb debug help (cont.)

[Doug Pippin]

Mathew

I have a 1st gen SV with the Factory Pro Race kit (wide mouth BMC filter).
Also have the cam swap
The bike runs good with the following settings based on several dyno 
runs. I'm at 2400 ft elevation but a lot of the tracks I run are 
lower elevation.

Front 
Rear
Main 
jet  155 
              Main jet  152.5
Pilot 
jet  15 
                Pilot jet  15
Needle  3rd from 
top 
Needle  3rd from top

hope this helps
Doug

----------
At 03:00 PM 8/28/2010, you wrote:
>Date: Sat, 28 Aug 2010 02:55:10 -0700 (PDT)
>From: matthew patton <pattonme at yahoo.com>
>Subject: jetting/carb debug help (cont.)
>To: sv650 at micapeak.com
>
>I'm working off the Factory Pro v1 kit and a BMC race filter + yosh 
>race pipe. Per their instruction sheet:
>
>140/142 mains
>Factory needle at 3 clips
>2.25 turns on mixture


----------
Doug Pippin
828-684-8488
<mailto:>d_pippin_89<mailto:>@bellsouth.net

----------