1 st generation crank shaft

KC Gager kc at brgracing.com
Thu Jun 3 22:06:37 PDT 2010


The great Z has spoken..... it's good he's around
 
The Home of A Sickness for Quickness
K.C.  Owner of BRG Racing Products and Dyno Services
kc at brgracing.com
Shop # 925-680-2560 
Toll Free # 1-877-ride-brg 
Address
110 2nd Ave South Unit D 12
Pacheco Ca 94553
AFM's 650 Twins Championship '08\'09 with Wil Fox
AFM's Formula IV Class second place '09 with Wil Fox
AFM's Formula Pacific #1 plate, '07\'08 with Dave Stanton
AFM's 650 Twins Championship '07 with Jeff Hagan
AFM's Formula IV Class Championship '07 with Jeff Hagan
AFM's 650 Twins Second Place '06 with Dave Civiello 
AFM's 600 Superbike Championship '05 with Chris Siglin
AFM's Open Production Championship '04 with Chris Siglin
AFM's 650 Twins Championship '02 with Woody Woodward
AFM's 500 Twins second place '99 with Simon Forder
AFM's 500 Twins Championship '98 with Simon Forde

-----Original Message-----
From: sv650-bounces at micapeak.com [mailto:sv650-bounces at micapeak.com] On
Behalf Of zoran
Sent: Thursday, June 03, 2010 8:06 PM
To: Suzuki SV650 Mailing List
Subject: Re: 1 st generation crank shaft

Difference is that 2nd gen has grove for oil in one of main journals and 
trust bearing is built in to crank. In other words 2nd gen crank does not 
use trust bearing.
I have 2nd gen crank in my 1st gen motor right now.


Thanks

Zoran Vujasinovic
Twin Works Factory
775-786-4881
www.twfracing.com

----- Original Message ----- 
From: "Dan Chrystal" <dchrysta at columbus.rr.com>
To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
Sent: Thursday, June 03, 2010 8:02 PM
Subject: Re: 1 st generation crank shaft


> When I compared them this morning they looked close, but seemed to have 
> some
> subtle differences, is it a drop in, just follow the end play measurement
> per the 1 st gen manual? Anything else to watch for?
>
> Thanks,
>
> Dan
>
> On Thu, Jun 3, 2010 at 10:43 PM, zoran <zv30 at sbcglobal.net> wrote:
>
>> They are, you can use either one in either motor.
>>
>>
>> Thanks
>>
>> Zoran Vujasinovic
>> Twin Works Factory
>> 775-786-4881
>> www.twfracing.com
>> ----- Original Message ----- From: "Ernest Montague" 
>> <afm199 at earthlink.net
>> >
>> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
>> Sent: Thursday, June 03, 2010 7:40 PM
>> Subject: Re: 1 st generation crank shaft
>>
>>
>>
>>  Not really
>>>
>>> gen one can fit gen two with shims
>>>
>>>
>>> On Jun 3, 2010, at 7:38 PM, Steve Robertson wrote:
>>>
>>>  I thought cranks were interchangeable, no?
>>>>
>>>>  I need a 1 st generation crank shaft, I have a good second generation
>>>>> crank shaft with rods. Anyone have one they would like to trade?
>>>>> Dan
>>>>>
>>>>
>>>>
>>> 



More information about the SV650 mailing list