Noisy motor cam bolts

[KC Gager]

I'd strongly recommend welding the gears to the cam too... 

 
 
The Home of A Sickness for Quickness
K.C.  Owner of BRG Racing Products and Dyno Services
kc at brgracing.com
Shop # 925-680-2560 
Toll Free # 1-877-ride-brg 
Address
110 2nd Ave South Unit D 12
Pacheco Ca 94553
AFM's 650 Twins Championship '08\'09 with Wil Fox
AFM's Formula IV Class second place '09 with Wil Fox
AFM's Formula Pacific #1 plate, '07\'08 with Dave Stanton
AFM's 650 Twins Championship '07 with Jeff Hagan
AFM's Formula IV Class Championship '07 with Jeff Hagan
AFM's 650 Twins Second Place '06 with Dave Civiello 
AFM's 600 Superbike Championship '05 with Chris Siglin
AFM's Open Production Championship '04 with Chris Siglin
AFM's 650 Twins Championship '02 with Woody Woodward
AFM's 500 Twins second place '99 with Simon Forder
AFM's 500 Twins Championship '98 with Simon Forde
-----Original Message-----
From: sv650-bounces at micapeak.com [mailto:sv650-bounces at micapeak.com] On
Behalf Of Ernest Montague
Sent: Wednesday, May 05, 2010 7:47 AM
To: Suzuki SV650 Mailing List
Subject: Noisy motor cam bolts

Be sure and check that the bolts on the exhaust cams did not loosen 
enough to allow the sprocket to move. I ruined a motor when that 
happened.   piston to valve contact

Ernie