Noisy motor cam bolts

[kc]

How do u spell ass-u-me :-)

We have a Sickness for Quickness 
KC BRG Racing Products 
110 2nd Ave South Unit D12
Pacheco Ca 94553
925-680-2560

-----Original Message-----
From: sv650-bounces at micapeak.com [mailto:sv650-bounces at micapeak.com] On
Behalf Of Ted Temple
Sent: Wednesday, May 05, 2010 9:24 AM
To: Suzuki SV650 Mailing List
Subject: RE: Noisy motor cam bolts

Good point KC - I didn't think anyone would use them without doing that.
Never assume though...  :-)

Ted Temple
LRRS #52 - WERA #552
Sponsored By: 
Spears Enterprises - www.SpearsEnterprises.com  
Street & Competition - www.streetandcomp.com
Woodcraft - www.woodcraft-cfm.com


--- On Wed, 5/5/10, KC Gager <kc at brgracing.com> wrote:

> From: KC Gager <kc at brgracing.com>
> Subject: RE: Noisy motor cam bolts
> To: "'Suzuki SV650 Mailing List'" <sv650 at micapeak.com>
> Date: Wednesday, May 5, 2010, 11:07 AM
> I'd strongly recommend welding the
> gears to the cam too... 
> 
>  
>  
> The Home of A Sickness for Quickness
> K.C.  Owner of BRG Racing Products and Dyno Services
> kc at brgracing.com
> Shop # 925-680-2560 
> Toll Free # 1-877-ride-brg 
> Address
> 110 2nd Ave South Unit D 12
> Pacheco Ca 94553
> AFM's 650 Twins Championship '08\'09 with Wil Fox
> AFM's Formula IV Class second place '09 with Wil Fox
> AFM's Formula Pacific #1 plate, '07\'08 with Dave Stanton
> AFM's 650 Twins Championship '07 with Jeff Hagan
> AFM's Formula IV Class Championship '07 with Jeff Hagan
> AFM's 650 Twins Second Place '06 with Dave Civiello 
> AFM's 600 Superbike Championship '05 with Chris Siglin
> AFM's Open Production Championship '04 with Chris Siglin
> AFM's 650 Twins Championship '02 with Woody Woodward
> AFM's 500 Twins second place '99 with Simon Forder
> AFM's 500 Twins Championship '98 with Simon Forde
> -----Original Message-----
> From: sv650-bounces at micapeak.com
> [mailto:sv650-bounces at micapeak.com]
> On
> Behalf Of Ernest Montague
> Sent: Wednesday, May 05, 2010 7:47 AM
> To: Suzuki SV650 Mailing List
> Subject: Noisy motor cam bolts
> 
> Be sure and check that the bolts on the exhaust cams did
> not loosen 
> enough to allow the sprocket to move. I ruined a motor when
> that 
> happened.   piston to valve contact
> 
> Ernie
> 
>