Removing magnets from stator rotor...

[Ted Temple]

I just took a blow torch and heated every other magnet one at a time until they exlpoded.  There are six magnets and I took out three.  I'm sure balance "could" be an issue but I've never had a problem with mine.  YMMV and all...

If you don't need the charging system there are commercial options available that eliminate the magnets and also provide a much lighter stator.  Hit me offlist if that would be applicable for you so I don't SPAM the list...  :-)  

Ted Temple
LRRS #52 - WERA #552
Sponsored By: 
Spears Enterprises - www.SpearsEnterprises.com  
Street & Competition - www.streetandcomp.com
Woodcraft - www.woodcraft-cfm.com


--- On Wed, 5/12/10, kc <kc at brgracing.com> wrote:

> From: kc <kc at brgracing.com>
> Subject: RE: Removing magnets from stator rotor...
> To: "'Suzuki SV650 Mailing List'" <sv650 at micapeak.com>
> Date: Wednesday, May 12, 2010, 4:14 PM
> Are u worried about the balance of
> the rotor. 
> 
> We have a Sickness for Quickness 
> KC BRG Racing Products 
> 110 2nd Ave South Unit D12
> Pacheco Ca 94553
> 925-680-2560
> 
> 
> -----Original Message-----
> From: sv650-bounces at micapeak.com
> [mailto:sv650-bounces at micapeak.com]
> On
> Behalf Of Chris Burgess
> Sent: Wednesday, May 12, 2010 11:41 AM
> To: Suzuki SV650 Mailing List
> Subject: Re: Removing magnets from stator rotor...
> 
> Ok sweet.  I know what I'm doing tonight. :) 
> Time to go down to two
> magnets.
> 
> -Chris
> 
> On Wed, May 12, 2010 at 11:35 AM, Thumper Ray <thumperracer at yahoo.com>wrote:
> 
> > Yeah, that epoxy thing.
> >
> > --- On Wed, 5/12/10, Chris Burgess <chris at chrisburgess.com>
> wrote:
> >
> > > From: Chris Burgess <chris at chrisburgess.com>
> > > Subject: Re: Removing magnets from stator
> rotor...
> > > To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> > > Date: Wednesday, May 12, 2010, 2:02 PM
> >  > OK...so how do I do it?  Do I
> > > grind off those stubs on the outside of the
> > > rotor?  Or are they just epoxied to the
> rotor and I
> > > just need to take my
> > > time with a chisel?
> > >
> > > -Chris
> > >
> > > On Wed, May 12, 2010 at 10:54 AM, KC <kc at brgracing.com>
> > > wrote:
> > >
> > > > Practice
> > > >
> > > >
> > > > K.C. Owner
> > > >
> > > > BRG Racing Products and Dyno Services
> > > >
> > > > Home of a Sickness for Quickness
> > > >  Shop phone 925-680-2560
> > > >      kc at brgraing.com
> > > >          Shop
> Address
> > > > 110 2nd Ave South Unit D 12
> > > >       Pacheco Ca
> 94553
> > > >  -----Original Message-----
> > > > From: sv650-bounces at micapeak.com
> > > [mailto:sv650-bounces at micapeak.com]
> > > On
> > > > Behalf Of Chris Burgess
> > > > Sent: Wednesday, May 12, 2010 10:50 AM
> > > > To: Suzuki SV650 Mailing List
> > > > Subject: Removing magnets from stator
> rotor...
> > > >
> > > > So I want to remove some magnets from the
> stator rotor
> > > (race bike).  Is
> > > > there a trick to doing this?
> > > >
> > > > -Chris
> > > > No virus found in this incoming message.
> > > > Checked by AVG - www.avg.com
> > > > Version: 9.0.819 / Virus Database:
> 271.1.1/2869 -
> > > Release Date: 05/11/10
> > > > 23:26:00
> > > >
> > > >
> > >
> > >
> > > --
> > > WERA #104
> > > OMRRA #104
> > > WMRRA #104
> > > http://www.burgiracing.com
> > > http://www.sponsorhouse.com/members/thatman
> > >
> > > 2010 Sponsors
> > > Vortex Racing - http://www.vortexracing.com
> > > Motorex - http://www.motorex.com
> > >
> >
> >
> >
> >
> 
> 
> -- 
> WERA #104
> OMRRA #104
> WMRRA #104
> http://www.burgiracing.com
> http://www.sponsorhouse.com/members/thatman
> 
> 2010 Sponsors
> Vortex Racing - http://www.vortexracing.com
> Motorex - http://www.motorex.com
> 
>