Removing magnets from stator rotor...

Ted Temple lrrs52 at yahoo.com
Mon May 17 12:25:44 PDT 2010


I took out every other magnet to retain as much balance as possible.  I'd just buy one of the Spears rotors if I ever did it again...
 
Ted Temple
LRRS #52 - WERA #552
Sponsored By: 
Spears Enterprises - www.SpearsEnterprises.com  
Street & Competition - www.streetandcomp.com
Woodcraft - www.woodcraft-cfm.com


--- On Wed, 5/12/10, Chris Burgess <chris at chrisburgess.com> wrote:

> From: Chris Burgess <chris at chrisburgess.com>
> Subject: Re: Removing magnets from stator rotor...
> To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> Date: Wednesday, May 12, 2010, 4:27 PM
> Did they really just explode?
> 
> And I still want my charging system.  Its a pain to
> not have it and I do use
> this bike to do some control riding.
> 
> 2 magnets supposely will give me a charge at operating
> speed....but if I let
> it idle it won't charge.
> 
> -Chris
> 
> On Wed, May 12, 2010 at 1:25 PM, Ted Temple <lrrs52 at yahoo.com>
> wrote:
> 
> > I just took a blow torch and heated every other magnet
> one at a time until
> > they exlpoded.  There are six magnets and I took
> out three.  I'm sure
> > balance "could" be an issue but I've never had a
> problem with mine.  YMMV
> > and all...
> >
> > If you don't need the charging system there are
> commercial options
> > available that eliminate the magnets and also provide
> a much lighter stator.
> >  Hit me offlist if that would be applicable for
> you so I don't SPAM the
> > list...  :-)
> >
> > Ted Temple
> > LRRS #52 - WERA #552
> > Sponsored By:
> > Spears Enterprises - www.SpearsEnterprises.com<http://www.spearsenterprises.com/>
> > Street & Competition - www.streetandcomp.com
> > Woodcraft - www.woodcraft-cfm.com
> >
> >
> > --- On Wed, 5/12/10, kc <kc at brgracing.com>
> wrote:
> >
> > > From: kc <kc at brgracing.com>
> > > Subject: RE: Removing magnets from stator
> rotor...
> > > To: "'Suzuki SV650 Mailing List'" <sv650 at micapeak.com>
> > > Date: Wednesday, May 12, 2010, 4:14 PM
> >  > Are u worried about the balance of
> > > the rotor.
> > >
> > > We have a Sickness for Quickness
> > > KC BRG Racing Products
> > > 110 2nd Ave South Unit D12
> > > Pacheco Ca 94553
> > > 925-680-2560
> > >
> > >
> > > -----Original Message-----
> > > From: sv650-bounces at micapeak.com
> > > [mailto:sv650-bounces at micapeak.com]
> > > On
> > > Behalf Of Chris Burgess
> > > Sent: Wednesday, May 12, 2010 11:41 AM
> > > To: Suzuki SV650 Mailing List
> > > Subject: Re: Removing magnets from stator
> rotor...
> > >
> > > Ok sweet.  I know what I'm doing tonight.
> :)
> > > Time to go down to two
> > > magnets.
> > >
> > > -Chris
> > >
> > > On Wed, May 12, 2010 at 11:35 AM, Thumper Ray
> <thumperracer at yahoo.com
> > >wrote:
> > >
> > > > Yeah, that epoxy thing.
> > > >
> > > > --- On Wed, 5/12/10, Chris Burgess <chris at chrisburgess.com>
> > > wrote:
> > > >
> > > > > From: Chris Burgess <chris at chrisburgess.com>
> > > > > Subject: Re: Removing magnets from
> stator
> > > rotor...
> > > > > To: "Suzuki SV650 Mailing List" <sv650 at micapeak.com>
> > > > > Date: Wednesday, May 12, 2010, 2:02 PM
> > > >  > OK...so how do I do it?  Do
> I
> > > > > grind off those stubs on the outside of
> the
> > > > > rotor?  Or are they just epoxied
> to the
> > > rotor and I
> > > > > just need to take my
> > > > > time with a chisel?
> > > > >
> > > > > -Chris
> > > > >
> > > > > On Wed, May 12, 2010 at 10:54 AM, KC
> <kc at brgracing.com>
> > > > > wrote:
> > > > >
> > > > > > Practice
> > > > > >
> > > > > >
> > > > > > K.C. Owner
> > > > > >
> > > > > > BRG Racing Products and Dyno
> Services
> > > > > >
> > > > > > Home of a Sickness for Quickness
> > > > > >  Shop phone 925-680-2560
> > > > > >      kc at brgraing.com
> > > > > >         
> Shop
> > > Address
> > > > > > 110 2nd Ave South Unit D 12
> > > > > >   
>    Pacheco Ca
> > > 94553
> > > > > >  -----Original Message-----
> > > > > > From: sv650-bounces at micapeak.com
> > > > > [mailto:sv650-bounces at micapeak.com]
> > > > > On
> > > > > > Behalf Of Chris Burgess
> > > > > > Sent: Wednesday, May 12, 2010
> 10:50 AM
> > > > > > To: Suzuki SV650 Mailing List
> > > > > > Subject: Removing magnets from
> stator
> > > rotor...
> > > > > >
> > > > > > So I want to remove some magnets
> from the
> > > stator rotor
> > > > > (race bike).  Is
> > > > > > there a trick to doing this?
> > > > > >
> > > > > > -Chris
> > > > > > No virus found in this incoming
> message.
> > > > > > Checked by AVG - www.avg.com
> > > > > > Version: 9.0.819 / Virus
> Database:
> > > 271.1.1/2869 -
> > > > > Release Date: 05/11/10
> > > > > > 23:26:00
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > WERA #104
> > > > > OMRRA #104
> > > > > WMRRA #104
> > > > > http://www.burgiracing.com
> > > > > http://www.sponsorhouse.com/members/thatman
> > > > >
> > > > > 2010 Sponsors
> > > > > Vortex Racing - http://www.vortexracing.com
> > > > > Motorex - http://www.motorex.com
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > WERA #104
> > > OMRRA #104
> > > WMRRA #104
> > > http://www.burgiracing.com
> > > http://www.sponsorhouse.com/members/thatman
> > >
> > > 2010 Sponsors
> > > Vortex Racing - http://www.vortexracing.com
> > > Motorex - http://www.motorex.com
> > >
> > >
> >
> >
> >
> >
> 
> 
> -- 
> WERA #104
> OMRRA #104
> WMRRA #104
> http://www.burgiracing.com
> http://www.sponsorhouse.com/members/thatman
> 
> 2010 Sponsors
> Vortex Racing - http://www.vortexracing.com
> Motorex - http://www.motorex.com
> 


      


More information about the SV650 mailing list