Transmission sprocket ?

Chris Burgess chris at chrisburgess.com
Tue Aug 16 09:25:19 PDT 2011


I use channel lock pliers.

-Chris

On Tue, Aug 16, 2011 at 9:19 AM, Henrik Bo Pedersen <henrikbp at gmail.com>wrote:

> Hmmm, that puts the numbers in towards the case.
>
> Well, good thing I didn't bend down the lock washer yet ...  :-)
>
> What is a good way to get a nice bend on that washer: wood chisel and then
> a flat tip punch? Gently.
>
> Henrik
>
> On Aug 15, 2011, at 1:17 AM, Zoran wrote:
>
> > Actually raised side goes out. Stock sprocket is flat on back side so
> should any you replace it with.
> >
> >
> >
> > Thanks,
> >
> > Zoran Vujasinovic
> > TWF Racing
> > 775-786-4881
> > www.twfracing.com
> >
> >
> >
> >
> > On Aug 14, 2011, at 1:20 PM, Henrik Bo Pedersen wrote:
> >
> >> Thanks Ernest
> >>
> >> On Aug 13, 2011, at 5:58 PM, Ernest Montague wrote:
> >>
> >>> raised in
> >>
> >> That makes sense - it puts the engraved sprocket part number and tooth
> count facing out and readable.
> >>
> >>> I use a two by four and block the wheel.
> >>
> >> Yep. that's what I've done on other bikes
> >>
> >>> put the chain on and SEE how many links you need, much safer
> >>
> >> Good idea. I'll route the chain - which is exactly 110 links - and see
> how it fits.
> >>
> >> Henrik
> >>
> >>
> >>> On Aug 13, 2011, at 2:43 PM, Henrik Bo Pedersen wrote:
> >>>
> >>>> Sorry - rookie question alert:
> >>>>
> >>>> I'm exchanging my stock chain/sprocket setup for a Superlite 520
> conversion kit, keeping the stock 15/45 gearing.
> >>>>
> >>>> - the 520 transmission sprocket has one side flat and the other side
> has a raised area. When comparing to the tooth alignment on the stock
> sprocket it looks like the raised side should face out and away from the
> engine. Is that correct?
> >>>>
> >>>> - from the manual it looks like I will need to put the chain on and
> block the rear wheel (2x4) in order to tighten the nut to the 105 ft.lbs.
> specified in the manual. Correct?
> >>>>
> >>>> - since I'm keeping stock 15/45 gearing I should count out 110 links -
> as specified in the manual - on the new chain - right?
> >>>>
> >>>> Anything else I should keep an eye out for?
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Henrik
> >>>
> >>
> >
>
>


-- 
WERA #104
OMRRA #104
WMRRA #104
http://www.burgiracing.com

2011 Sponsors
KFG Racing - http://www.kfgracing.com
Vortex Racing - http://www.vortexracing.com


More information about the SV650 mailing list