2004-05 GSX-R forks & Yamaha monoblock calipers

Zoran zv30 at sbcglobal.net
Sun Jul 24 17:52:02 PDT 2011


Calipers, not rotors. $35



Thanks,

Zoran Vujasinovic
TWF Racing
775-786-4881
www.twfracing.com




On Jul 24, 2011, at 5:32 PM, Stuart Ferreira wrote:

> 
> How much do you charge the machine the rotors?  I may have a set I want done.
> 
> 
>> Subject: Re: 2004-05 GSX-R forks & Yamaha monoblock calipers
>> From: zv30 at sbcglobal.net
>> Date: Sat, 23 Jul 2011 22:03:41 -0700
>> To: sv650 at micapeak.com
>> 
>> I machined many of this calipers to work with 300 rotors. It is 8mm not 10.
>> Or you can use srad gen rotors as mentioned and 2mm spacers.
>> Steel centering bushing needs to come out regardless what you use.
>> 
>> 
>> 
>> Thanks,
>> 
>> Zoran Vujasinovic
>> TWF Racing
>> 775-786-4881
>> www.twfracing.com
>> 
>> 
>> 
>> 
>> On Jul 23, 2011, at 5:11 PM, Henrik Bo Pedersen wrote:
>> 
>>> I put 2005-05 forks on my '99 SV and was going to use Yamaha monoblock calipers of similar vintage. I thought it was a direct bolt-on, but it looks to me like the Yamaha calipers sit ~10mm proud. In other words, they'd need to sit ~10mm lower in order for the brake pads to make full contact with the rotors.
>>> 
>>> I could try to remove the steel centering bushings in the Yamaha calipers, but that would only buy me an additional ~3mm.
>>> 
>>> I could try to have 10mm machined off of the Yamaha "stand-offs" but from vague memory didn't think it was necessary.
>>> 
>>> Thoughts?
>>> 
>>> Henrik
>> 
> 		 	   		  



More information about the SV650 mailing list