3 passes on "new" GPZ + some questions

[Barblan]

Thanks Charles!
That was prompt!

Almost 12 o'clock here and I'm still in my office - and should be 
preparing tomorrows lessons ...

George

Charles Scappaticci schrieb:
> Very cool George.  I soooooo want to ride those passes someday.
>
> I'd suggest the ZXR1200 handlebar.  It's a bit pricey, but the bar is 
> made for the controls and matches up very nicely.  It's a bit narrower 
> than the LSL, and has a bit more pullback.
>
> Charles S.
>
> Barblan wrote:
>
>> Guys
>>
>> yesterday I did the three passes Susten- Furka - Grimsel an my  "new" 
>> Geeper with my friend Ignaz.
>> Beautiful drive!
>> See: http://www.igu.ch/Moto/07_saison/07_index.htm
>>
>> You can have fun without handlebar risers. But today I still have a 
>> funny feeling in my hands.
>> I'll put on my LSL as soon as I get a new handle bar.
>> The original LSL handle bar seems not to be available any more. 
>> Suggestions?
>>
>> The bike needs a valve adjustment and carb synchronization.
>>
>> Then the steering head bearing is not tight enough. Could that be the 
>> reason for head shakes between 60 - 80 km/h (bad if I let go of the 
>> steering)?
>>
>> If I brake with the front brakes: vibrations. Probably I'll have to 
>> replace the brake disks ....
>>
>> Thanks for all feedback!
>>
>> Have a good week!
>>
>> George, Thun, Switzerland 1 + 1 GPZs
>>
>>
>>
>>
>> .
>>
>

-- 
_____________________________________________________

BARBLAN  GEORGE & URSULA
NIESENBLICKSTRASSE 14       CH - 3600 THUN
SWITZERLAND

Tel. +41 33 222 97 10     FAX  +41 33 222 97 04

barblan at gmx.ch
_____________________________________________________