Anyone have a stock front sprocket for the 95-96?

[Paul Heim]

Jeff:

I think what you view as bending is normal wear on the leading edge of the 
gear teeth.  I've never seen sprocket teeth bend  I have definitely seen the 
teeth face with the heaviest loading become cupped from abrasion.  Replace 
ze schprockets!

Paul in Ohio
----- Original Message ----- 
From: "1KPerDay" <1kperday at gmail.com>
To: "GPZ LIST" <gpzlist at micapeak.com>
Sent: Saturday, July 05, 2008 10:27 PM
Subject: Anyone have a stock front sprocket for the 95-96?


> Steve, I believe you've said a couple of times that the ZRX1100 has
> the same countershaft sprocket... does the ZRX12?
>
> My OEM chain's been on its last legs for the past, oh, 2 years or so,
> so I figured I'd better take a look at the countershaft sprocket to
> see if it needs replacing. The teeth seem to be intact but they are
> very slightly bent... and they're bent in the opposite direction from
> how I figured they'd be. Not in the direction they would be from
> acceleration, but on the contrary. Anyone seen this before?  The rear
> sprocket teeth look like they haven't worn at all (other than the
> paint).
>
> -- 
> Utah Jeff
> '96 SheePz1100
>