Ultra sonic cleaners

[Marilyn Mason]

$30.00 sounds like a bargin.  The 1.5 gal Branson I used at work was nearly 
$1000.00.  But we were in the nuclear business and everything we got seemed 
to have the price jacked up.
I needed a coolant pump for a Buehler diamond saw and it was $129.95 from 
Buehler .  I found the same pump at Walmart meant for a garden waterfall for 
$19.97.

Jim
----- Original Message ----- 
From: "John Soliday" <johnsoliday at msn.com>
To: "Jim Mason" <MASONJS at nrtco.net>
Cc: "'Charles Scappaticci'" <scapco at ecentral.com>
Sent: Monday, April 25, 2011 9:40 AM
Subject: RE: Hard (impossible) to start


>I got an ultrasonic cleaner at Harbor Freight for ~$30.  I haven't used it
> on carbs, but it seems to do a good job of cleaning my girl friends 
> jewelry.
>
> -----Original Message-----
> From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com] 
> On
> Behalf Of Steven Bixby
> Sent: Sunday, April 24, 2011 1:34 PM
> To: John Soliday
> Cc: Charles Scappaticci
> Subject: Re: Hard (impossible) to start
>
> I wonder if the typical ultrasonic cleaner rigs you can get on the
> consumer market would do the job?  Or do they have some special
> heavy-duty-industrial-waste-capable,
> nuculear-powered-atomic-blast-resistant units?
>
> I've wanted to get a reasonably capable ultrasonic cleaner for home use,
> perhaps off eBay.  I have more than just carburetor-cleaning in mind, too.
>
> On 4/24/2011 12:19 PM, Charles Scappaticci wrote:
>> Michael,
>>
>> Carbs gunk up, that's just a fact.  When I reinstalled my jetted
>> carbs, they had sat for a couple of years and I knew they weren't that
>> clean when I had taken them off.  I had the local dealer do a thorough
>> ultrasonic cleaning and reinstalled them.  Three years later, it
>> starts at the touch of the button on it's five year old battery.  I
>> can almost guarantee you it will run and start a lot better when they
>> are done.  The dealer here charges $75 per carb for cleaning (Vickery
>> Motorsports) and the ultrasonic cleaning will do better that you can.
>>
>> Charles S.
>>
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/johnsoliday%40msn.com
> You are subscribed at the email address JOHNSOLIDAY at msn.com
> ______________________________________________________________________
>
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/masonjs%40nrtco.net
> You are subscribed at the email address MASONJS at nrtco.net
> ______________________________________________________________________
>