Buzzing and shaking after getting off the GPz.

Buehrle, Michael Michael.Buehrle at ottawa.ca
Thu Jun 28 05:06:21 PDT 2007


Handlebar conversion?
If you're still riding with clipons your wrists will tingle from pinched nerves.
Mike B.

-----Original Message-----
From: Paul Landry [mailto:p_landry at telus.net]
Sent: June 28,2007 12:54 AM
To: GPzList at micapeak.com
Subject: Buzzing and shaking after getting off the GPz.


Question for the group..
 
I have been riding my GPz since 2000.  It has over 55,000 Km on the clock.  
 
Two seasons ago I was irritated by what I perceive to be an increase in the
buzz / vibration of the bike.  Feel it in the tank, handle bars and foot
pegs.
I don't know if I am getting more sensitive or if it is getting worse.  It
is a high frequency buzz that is more noticeable as the revs climb but is
still a problem cruising around with the revs in the 3000 - 4500 range.
 
This is not something I have ever remembered from the past.  My last ride
which was short left my hands and feet tingling after I got of the bike.
What's up with that!??  Never used to be an issue and I ride for hours at a
time.  I have the stock counter weights on the stock handlebars (on GenMars)
with new foam rubber grips.  Same stock foot pegs with rubber top surface.
No engine mods except for the 4 degree ignition advance.
 
Last season I took the bike to the dealer for a tune up.  Had the carbs
synch'd, valves checked, etc..  Even had them check the torque on all the
engine mounts (no problem).
The mechanic was all a giggle about working on such a well maintained and
clean bike.  He said it was in terrific shape and had NO problems but would
need a new head gasket next time the valve cover came off.
 
The bike looks and runs GREAT!.  No other problems or concerns but I can not
put up with this numbing of my extremities, especially when it occurs on
such short rides.
 
Has anyone encountered anything similar?  Any suggestions as to what might
be the culprit, what to look at, etc.. 
Does this rig have some rubber isolation mounts on the motor that may have
hardened over time??
 
I am really hoping this is mechanical, that I can fix..  If it is
me......... 
 
Thanks for any and all thoughts on this.
 
Paul W. Landry
p_landry at telus.net
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.476 / Virus Database: 269.9.10/875 - Release Date: 27/06/2007
9:08 PM
 


This e-mail originates from the City of Ottawa e-mail 
system. Any distribution, use or copying of this e-mail or 
the information it contains by other than the intended 
recipient(s) is unauthorized. If you are not the intended 
recipient, please notify me at the telephone number shown 
above or by return e-mail and delete this communication and 
any copy immediately. Thank you.

Le présent courriel a été expédié par le syst`eme de 
courriels de la Ville d'Ottawa. Toute distribution, 
utilisation ou reproduction du courriel ou des 
renseignements qui s'y trouvent par une personne autre que 
son destinataire prévu est interdite. Si vous avez reçu le 
message par erreur, veuillez m'en aviser par téléphone (au 
numéro précité) ou par courriel, puis supprimer sans délai 
la version originale de la communication ainsi que toutes 
ses copies. Je vous remercie de votre collaboration.




More information about the GPZList mailing list