headlight rewiring with relay

Julian Solomensky jsolo at solo-tek.com
Wed Mar 12 20:52:36 PDT 2008


William,

When I installed the 80/100 bulb, I used 2 separate relays driven off the stock headlamp socket.  I used 12guage wire direct from the battery (fused of course).  

To me this was the simplest solution rather than try to figure out what kawasaki did.  In doing so, I could always very easily revert back to stock (since none of the original wiring was cut in any way).  My guess the additional relays are for latching purposes and/or to keep the headlight off while cranking.

Good luck.

Wednesday, March 12, 2008, 11:53:31 PM, William wrote:

> Hi all,

> I'm thinking about rewiring the headlamp circuit on the '96 GPz1100 with
> heavy gauge wire and a SPDT relay to improve lighting performance and leave
> the door open for increasing the wattage w/o worrying about melting wires.
> Just wondering:

> A) anyone has already done this?... and




More information about the GPZList mailing list