Front fork strength

Ped pedmail at
Fri May 16 23:20:27 PDT 2008

I installed progressive springs on mine last year and I found it to be a 
huge improvement. It doesn't dive nearly as much during braking, and yet 
it doesn't feel harder on rough surface. Unfortunately I can not find 
the link to the manufacturer, but they are German made anyway and I 
don't know if they are available in the US. I'm sure though that you'll 
have plenty of brands to choose from 'over there'. I'd recomment 
progressive springs to solve the problem.

'96 "Black Stealth" GPZ
(currently in 'Farawaygistan' and not riding)

blackbear at skrev:
> I installed a high-note car horn when the stock horn died on 
> the GPZ.  I thought there was plenty of room between the fender and 
> the horn, but I noticed the top of the (fairly newly painted) fender 
> has been worn down to the plastic and the horn is damaged.
> I checked, and it feels like the forks are compressing a LOT more than 
> I was used to.
> I had the oil changed a couple years ago when I had the seals 
> replaced.  using the mix of 10w and 15w that Scaps recommended.
> Is there any way of strengthening the front end short of cartridge 
> emulators?  i can't really afford that kind of conversion at this time.
> i will also look at ways of moving the horn so it won't hit anymore.  
> I put it where the stock one was as I was in a hurry to get the bike 
> inspected.
> Michael in holley, NY

More information about the GPZList mailing list