re- Sunday ride

The Masons masonjs at
Mon Jan 19 14:56:38 PST 2009

If you're that worried Pete, put some stabil in your tank, then drain your 
carbs.  I think you need either a 3mm or 4 mm hex key for the drain screws. 
As I recall I brazed one onto a 12" piece of 1/4" rod that I put a 90 degree 
bend in the other end, you need a long wrench to reach the far carb.
Before you try to start the bike again remember to prime your carbs or 
you'll drain your battery trying to fill them.


More information about the GPZList mailing list