Plug wire questions
alisch80 at mchsi.com
Mon May 28 13:53:01 PDT 2007
Call out to anyone who has changed their plug wires/boots
I'm using the NGK #SD05F 5ohm plug boots that Murph has for the Concours
(Same engine top end) and they are about 1" too short. The grommet
that seals off the plug well will not fit. It has to be there to seal
the well from water, right?
See attached photo.
If the grommet is left out, the new boot sits in the well so far that it
cant be pulled out.
those of you who have replaced plug wires, how did you do this?
thanks, Art in DM
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 156313 bytes
Desc: not available
Url : http://www.micapeak.com/pipermail/gpzlist/attachments/20070528/478d472a/attachment.jpg
More information about the GPZList